Description
| Operation Mode | Y1,Y2,ALT,CHOP,ADD,X-Y |
|---|---|
| Deflection Factor | 5mV/div~10V/div in 1-2-5 sequence, altogether 11 steps. Error ±5% |
| MAG Rate | X5 Error ±5% |
| Frequency Bandwidth | AC: 10Hz ~ 20MHz -3dB DC: 0~ 20MHZ -3dB |
| Frequency Bandwidth By MAG | AC: 10Hz ~ 5MHz -3dB DC: 0~ 5MHZ -3dB |
| Rising Time | ≤18ns, <70ns by MAG |
| Overshot | ≤5% |
| Damp | ≤5% |
| Coupling Mode | AC, DC |
| Input implement | 1±5%MΩ, ≤30pF(direct) 10±5%MΩ, ≤23pF (by probe) |
| MAX. Safe Voltage | 400V(DC+ACp-p) |
| Slope Inverting | Y2 only |
| Triggering Source | Y1, Y2, ALT, POWER, EXT |
|---|---|
| Coupling | AC/DC (EXT), NORM/TV |
| Polarity | +,- |
| Synchronized Frequency Range | Auto: 50Hz ~ 20MHz |
| MIN. Synchronized Trigger Level | Trig: 5Hz~20MHz Int: 1div; 2div Tv: Int: 2div Ext: 0.3Vp-p Trig Lock (20Hz~10MHz)Ext: 0.3Vp-p Int: 2 div |
| Input implement (By Ext Trigger | 1±5%MΩ,≤30pF |
| MAX. Safe Voltage | 400V(DC+ACp-p) |
| Sweep Mode | AUTO, TRIG, LOCK, SINGLE |
|---|---|
| Sweep Time Factor | 0.1μ s/div~0.2s/div In 1-2-5 sequence Altogether 20 steps Error ±5% |
| MAG | x5 Error ±10% |
| Signal Input | X-Axis: Y1 Y-Axis: Y2 |
|---|---|
| Deflection Factor | Same as Y1 |
| Frequency Response | AC: 10Hz ~ 1MHz -3dB DC:0 ~ 1MHz -3dB |
| Input Implement | Same as Y1 |
| MAX. Safe Voltage | Same as Y1 |
| X-Y Phase Difference | ≤3˚(DC~50kHz) |
| MIN. Input Level | TTL Level |
|---|---|
| MAX. Input Voltage | 50V (DC+ACp-p) |
| Input Resistance | 10kΩ |
| Input Polarity | Low level to brighten |
| Frequency Range | DC ~ 5MHz |
| Waveform | Square wave |
|---|---|
| Amplitude | 0.5±2% Vp-p |
| Frequency | 1±2%kHz |
| Persistence | MIDDLE PERSISTENCE | LONG PERSISTENCE |
|---|---|---|
| Working Area | 8CM x 10CM (1CM=1DIV) | |
| Power | 220±10%V |
|---|---|
| Frequency | 50±5%Hz |
| Power Consumption | About 35VA |
| Weight | 7.2kg |
|---|---|
| Dimension | 320(H) x 130(W) x 400(D)mm |
| AC 9VRMS : No Load |
| 2mA : SHORT |
Reviews
There are no reviews yet.